From 45415fe25ff12598f0f9acd6349e28a362f38666 Mon Sep 17 00:00:00 2001
From: Sevan Janiyan <venture37@geeklan.co.uk>
Date: Mon, 25 Apr 2011 01:39:05 +0100
Subject: [PATCH] Committer: Sevan Janiyan <venture37@geeklan.co.uk>

---
 maven/conf/settings.xml |  514 +++++++++++++++++++++++-----------------------
 1 files changed, 257 insertions(+), 257 deletions(-)

diff --git a/maven/conf/settings.xml b/maven/conf/settings.xml
index 6ed7b28..45a878a 100755
--- a/maven/conf/settings.xml
+++ b/maven/conf/settings.xml
@@ -1,257 +1,257 @@
-<?xml version="1.0" encoding="UTF-8"?>
-
-<!--
-Licensed to the Apache Software Foundation (ASF) under one
-or more contributor license agreements.  See the NOTICE file
-distributed with this work for additional information
-regarding copyright ownership.  The ASF licenses this file
-to you under the Apache License, Version 2.0 (the
-"License"); you may not use this file except in compliance
-with the License.  You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing,
-software distributed under the License is distributed on an
-"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-KIND, either express or implied.  See the License for the
-specific language governing permissions and limitations
-under the License.
--->
-
-<!--
- | This is the configuration file for Maven. It can be specified at two levels:
- |
- |  1. User Level. This settings.xml file provides configuration for a single user, 
- |                 and is normally provided in ${user.home}/.m2/settings.xml.
- |
- |                 NOTE: This location can be overridden with the CLI option:
- |
- |                 -s /path/to/user/settings.xml
- |
- |  2. Global Level. This settings.xml file provides configuration for all Maven
- |                 users on a machine (assuming they're all using the same Maven
- |                 installation). It's normally provided in 
- |                 ${maven.home}/conf/settings.xml.
- |
- |                 NOTE: This location can be overridden with the CLI option:
- |
- |                 -gs /path/to/global/settings.xml
- |
- | The sections in this sample file are intended to give you a running start at
- | getting the most out of your Maven installation. Where appropriate, the default
- | values (values used when the setting is not specified) are provided.
- |
- |-->
-<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0" 
-          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
-          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
-  <!-- localRepository
-   | The path to the local repository maven will use to store artifacts.
-   |
-   | Default: ~/.m2/repository
-  <localRepository>/path/to/local/repo</localRepository>
-  -->
-
-  <!-- interactiveMode
-   | This will determine whether maven prompts you when it needs input. If set to false,
-   | maven will use a sensible default value, perhaps based on some other setting, for
-   | the parameter in question.
-   |
-   | Default: true
-  <interactiveMode>true</interactiveMode>
-  -->
-
-  <!-- offline
-   | Determines whether maven should attempt to connect to the network when executing a build.
-   | This will have an effect on artifact downloads, artifact deployment, and others.
-   |
-   | Default: false
-  <offline>false</offline>
-  -->
-
-  <!-- pluginGroups
-   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
-   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
-   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
-   |-->
-  <pluginGroups>
-    <!-- pluginGroup
-     | Specifies a further group identifier to use for plugin lookup.
-    <pluginGroup>com.your.plugins</pluginGroup>
-    -->
-  </pluginGroups>
-
-  <!-- proxies
-   | This is a list of proxies which can be used on this machine to connect to the network.
-   | Unless otherwise specified (by system property or command-line switch), the first proxy
-   | specification in this list marked as active will be used.
-   |-->
-  <proxies>
-    <!-- proxy
-     | Specification for one proxy, to be used in connecting to the network.
-     |
-    <proxy>
-      <id>optional</id>
-      <active>true</active>
-      <protocol>http</protocol>
-      <username>proxyuser</username>
-      <password>proxypass</password>
-      <host>proxy.host.net</host>
-      <port>80</port>
-      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
-    </proxy>
-    -->
-  </proxies>
-
-  <!-- servers
-   | This is a list of authentication profiles, keyed by the server-id used within the system.
-   | Authentication profiles can be used whenever maven must make a connection to a remote server.
-   |-->
-  <servers>
-    <!-- server
-     | Specifies the authentication information to use when connecting to a particular server, identified by
-     | a unique name within the system (referred to by the 'id' attribute below).
-     | 
-     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are 
-     |       used together.
-     |
-    <server>
-      <id>deploymentRepo</id>
-      <username>repouser</username>
-      <password>repopwd</password>
-    </server>
-    -->
-    
-    <!-- Another sample, using keys to authenticate.
-    <server>
-      <id>siteServer</id>
-      <privateKey>/path/to/private/key</privateKey>
-      <passphrase>optional; leave empty if not used.</passphrase>
-    </server>
-    -->
-  </servers>
-
-  <!-- mirrors
-   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
-   | 
-   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
-   | However, this repository may have problems with heavy traffic at times, so people have mirrored
-   | it to several places.
-   |
-   | That repository definition will have a unique id, so we can create a mirror reference for that
-   | repository, to be used as an alternate download site. The mirror site will be the preferred 
-   | server for that repository.
-   |-->
-  <mirrors>
-    <!-- mirror
-     | Specifies a repository mirror site to use instead of a given repository. The repository that
-     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
-     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
-     |
-    <mirror>
-      <id>mirrorId</id>
-      <mirrorOf>repositoryId</mirrorOf>
-      <name>Human Readable Name for this Mirror.</name>
-      <url>http://my.repository.com/repo/path</url>
-    </mirror>
-     -->
-  </mirrors>
-  
-  <!-- profiles
-   | This is a list of profiles which can be activated in a variety of ways, and which can modify
-   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
-   | specific paths and repository locations which allow the build to work in the local environment.
-   |
-   | For example, if you have an integration testing plugin - like cactus - that needs to know where
-   | your Tomcat instance is installed, you can provide a variable here such that the variable is 
-   | dereferenced during the build process to configure the cactus plugin.
-   |
-   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
-   | section of this document (settings.xml) - will be discussed later. Another way essentially
-   | relies on the detection of a system property, either matching a particular value for the property,
-   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a 
-   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
-   | Finally, the list of active profiles can be specified directly from the command line.
-   |
-   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
-   |       repositories, plugin repositories, and free-form properties to be used as configuration
-   |       variables for plugins in the POM.
-   |
-   |-->
-  <profiles>
-    <!-- profile
-     | Specifies a set of introductions to the build process, to be activated using one or more of the
-     | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
-     | or the command line, profiles have to have an ID that is unique.
-     |
-     | An encouraged best practice for profile identification is to use a consistent naming convention
-     | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
-     | This will make it more intuitive to understand what the set of introduced profiles is attempting
-     | to accomplish, particularly when you only have a list of profile id's for debug.
-     |
-     | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
-    <profile>
-      <id>jdk-1.4</id>
-
-      <activation>
-        <jdk>1.4</jdk>
-      </activation>
-
-      <repositories>
-        <repository>
-          <id>jdk14</id>
-          <name>Repository for JDK 1.4 builds</name>
-          <url>http://www.myhost.com/maven/jdk14</url>
-          <layout>default</layout>
-          <snapshotPolicy>always</snapshotPolicy>
-        </repository>
-      </repositories>
-    </profile>
-    -->
-
-    <!--
-     | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
-     | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
-     | might hypothetically look like:
-     |
-     | ...
-     | <plugin>
-     |   <groupId>org.myco.myplugins</groupId>
-     |   <artifactId>myplugin</artifactId>
-     |   
-     |   <configuration>
-     |     <tomcatLocation>${tomcatPath}</tomcatLocation>
-     |   </configuration>
-     | </plugin>
-     | ...
-     |
-     | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
-     |       anything, you could just leave off the <value/> inside the activation-property.
-     |
-    <profile>
-      <id>env-dev</id>
-
-      <activation>
-        <property>
-          <name>target-env</name>
-          <value>dev</value>
-        </property>
-      </activation>
-
-      <properties>
-        <tomcatPath>/path/to/tomcat/instance</tomcatPath>
-      </properties>
-    </profile>
-    -->
-  </profiles>
-
-  <!-- activeProfiles
-   | List of profiles that are active for all builds.
-   |
-  <activeProfiles>
-    <activeProfile>alwaysActiveProfile</activeProfile>
-    <activeProfile>anotherAlwaysActiveProfile</activeProfile>
-  </activeProfiles>
-  -->
-</settings>
+<?xml version="1.0" encoding="UTF-8"?>
+
+<!--
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements.  See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership.  The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License.  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing,
+software distributed under the License is distributed on an
+"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+KIND, either express or implied.  See the License for the
+specific language governing permissions and limitations
+under the License.
+-->
+
+<!--
+ | This is the configuration file for Maven. It can be specified at two levels:
+ |
+ |  1. User Level. This settings.xml file provides configuration for a single user, 
+ |                 and is normally provided in ${user.home}/.m2/settings.xml.
+ |
+ |                 NOTE: This location can be overridden with the CLI option:
+ |
+ |                 -s /path/to/user/settings.xml
+ |
+ |  2. Global Level. This settings.xml file provides configuration for all Maven
+ |                 users on a machine (assuming they're all using the same Maven
+ |                 installation). It's normally provided in 
+ |                 ${maven.home}/conf/settings.xml.
+ |
+ |                 NOTE: This location can be overridden with the CLI option:
+ |
+ |                 -gs /path/to/global/settings.xml
+ |
+ | The sections in this sample file are intended to give you a running start at
+ | getting the most out of your Maven installation. Where appropriate, the default
+ | values (values used when the setting is not specified) are provided.
+ |
+ |-->
+<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0" 
+          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
+          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
+  <!-- localRepository
+   | The path to the local repository maven will use to store artifacts.
+   |
+   | Default: ~/.m2/repository
+  <localRepository>/path/to/local/repo</localRepository>
+  -->
+
+  <!-- interactiveMode
+   | This will determine whether maven prompts you when it needs input. If set to false,
+   | maven will use a sensible default value, perhaps based on some other setting, for
+   | the parameter in question.
+   |
+   | Default: true
+  <interactiveMode>true</interactiveMode>
+  -->
+
+  <!-- offline
+   | Determines whether maven should attempt to connect to the network when executing a build.
+   | This will have an effect on artifact downloads, artifact deployment, and others.
+   |
+   | Default: false
+  <offline>false</offline>
+  -->
+
+  <!-- pluginGroups
+   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
+   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
+   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
+   |-->
+  <pluginGroups>
+    <!-- pluginGroup
+     | Specifies a further group identifier to use for plugin lookup.
+    <pluginGroup>com.your.plugins</pluginGroup>
+    -->
+  </pluginGroups>
+
+  <!-- proxies
+   | This is a list of proxies which can be used on this machine to connect to the network.
+   | Unless otherwise specified (by system property or command-line switch), the first proxy
+   | specification in this list marked as active will be used.
+   |-->
+  <proxies>
+    <!-- proxy
+     | Specification for one proxy, to be used in connecting to the network.
+     |
+    <proxy>
+      <id>optional</id>
+      <active>true</active>
+      <protocol>http</protocol>
+      <username>proxyuser</username>
+      <password>proxypass</password>
+      <host>proxy.host.net</host>
+      <port>80</port>
+      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
+    </proxy>
+    -->
+  </proxies>
+
+  <!-- servers
+   | This is a list of authentication profiles, keyed by the server-id used within the system.
+   | Authentication profiles can be used whenever maven must make a connection to a remote server.
+   |-->
+  <servers>
+    <!-- server
+     | Specifies the authentication information to use when connecting to a particular server, identified by
+     | a unique name within the system (referred to by the 'id' attribute below).
+     | 
+     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are 
+     |       used together.
+     |
+    <server>
+      <id>deploymentRepo</id>
+      <username>repouser</username>
+      <password>repopwd</password>
+    </server>
+    -->
+    
+    <!-- Another sample, using keys to authenticate.
+    <server>
+      <id>siteServer</id>
+      <privateKey>/path/to/private/key</privateKey>
+      <passphrase>optional; leave empty if not used.</passphrase>
+    </server>
+    -->
+  </servers>
+
+  <!-- mirrors
+   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
+   | 
+   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
+   | However, this repository may have problems with heavy traffic at times, so people have mirrored
+   | it to several places.
+   |
+   | That repository definition will have a unique id, so we can create a mirror reference for that
+   | repository, to be used as an alternate download site. The mirror site will be the preferred 
+   | server for that repository.
+   |-->
+  <mirrors>
+    <!-- mirror
+     | Specifies a repository mirror site to use instead of a given repository. The repository that
+     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
+     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
+     |
+    <mirror>
+      <id>mirrorId</id>
+      <mirrorOf>repositoryId</mirrorOf>
+      <name>Human Readable Name for this Mirror.</name>
+      <url>http://my.repository.com/repo/path</url>
+    </mirror>
+     -->
+  </mirrors>
+  
+  <!-- profiles
+   | This is a list of profiles which can be activated in a variety of ways, and which can modify
+   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
+   | specific paths and repository locations which allow the build to work in the local environment.
+   |
+   | For example, if you have an integration testing plugin - like cactus - that needs to know where
+   | your Tomcat instance is installed, you can provide a variable here such that the variable is 
+   | dereferenced during the build process to configure the cactus plugin.
+   |
+   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
+   | section of this document (settings.xml) - will be discussed later. Another way essentially
+   | relies on the detection of a system property, either matching a particular value for the property,
+   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a 
+   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
+   | Finally, the list of active profiles can be specified directly from the command line.
+   |
+   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
+   |       repositories, plugin repositories, and free-form properties to be used as configuration
+   |       variables for plugins in the POM.
+   |
+   |-->
+  <profiles>
+    <!-- profile
+     | Specifies a set of introductions to the build process, to be activated using one or more of the
+     | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
+     | or the command line, profiles have to have an ID that is unique.
+     |
+     | An encouraged best practice for profile identification is to use a consistent naming convention
+     | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
+     | This will make it more intuitive to understand what the set of introduced profiles is attempting
+     | to accomplish, particularly when you only have a list of profile id's for debug.
+     |
+     | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
+    <profile>
+      <id>jdk-1.4</id>
+
+      <activation>
+        <jdk>1.4</jdk>
+      </activation>
+
+      <repositories>
+        <repository>
+          <id>jdk14</id>
+          <name>Repository for JDK 1.4 builds</name>
+          <url>http://www.myhost.com/maven/jdk14</url>
+          <layout>default</layout>
+          <snapshotPolicy>always</snapshotPolicy>
+        </repository>
+      </repositories>
+    </profile>
+    -->
+
+    <!--
+     | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
+     | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
+     | might hypothetically look like:
+     |
+     | ...
+     | <plugin>
+     |   <groupId>org.myco.myplugins</groupId>
+     |   <artifactId>myplugin</artifactId>
+     |   
+     |   <configuration>
+     |     <tomcatLocation>${tomcatPath}</tomcatLocation>
+     |   </configuration>
+     | </plugin>
+     | ...
+     |
+     | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
+     |       anything, you could just leave off the <value/> inside the activation-property.
+     |
+    <profile>
+      <id>env-dev</id>
+
+      <activation>
+        <property>
+          <name>target-env</name>
+          <value>dev</value>
+        </property>
+      </activation>
+
+      <properties>
+        <tomcatPath>/path/to/tomcat/instance</tomcatPath>
+      </properties>
+    </profile>
+    -->
+  </profiles>
+
+  <!-- activeProfiles
+   | List of profiles that are active for all builds.
+   |
+  <activeProfiles>
+    <activeProfile>alwaysActiveProfile</activeProfile>
+    <activeProfile>anotherAlwaysActiveProfile</activeProfile>
+  </activeProfiles>
+  -->
+</settings>
-- 
1.7.4.5